Combi pipe boots

For roof from a metal profile, metal roofing, rebated roofing.
Acceptable angles roof slopes from 0° to 45°.

Maximum operating temperature и EPDM +185 ºC
Temperature limit of brittleness (minimum operating temperature) EPDM -55 ºC
Resistance to thermal, light, ozone aging 96 ± 1 hour, at t = (40 ± 2) ºС and the volume fraction of ozone (5,0 ± 0,5) * 10 – 5%
Long-term thermal impact At t = 100 ºС within 72 hours the change in linear dimensions is not more than 2%

Membrane from elastic material – EPDM, not exposed to atmospheric and corrosive effects.

The membrane design allows to install a penetration to any roof slope up to 50º.

Pipe boot Diameter, mm Flange, mm
Combi #4 75 – 160 280 x 280
Combi #8 175 – 330 465 x 465
Combi #10 305 – 725 860 x 860
Combi #11 500 – 1000 1200 x 1200

4 sizes
6 colors
: black, red, brown, green, gray, blue
seal diameters:
from 75 mm to 1000 mm
Difference from Straight pipe boot
When installed at critical angles, the cuff is deformed significantly less than the straight one.

Difference from Angular pipe boot
Due to the fact that the combined cuff has a completely rubber flange, fringed with an aluminum strip, it is much easier and more reliable to be mounted on the roof of various modifications.

Combi #4


Combi #4

diameter: 75 — 160 mm
flange: 280 x 280 mm

Combi #8


Combi #8

diameter: 175 — 330 mm
flange: 465 x 465 mm

Combi #10


Combi #10

diameter: 305 — 725 mm
flange: 860 x 860 mm

Combi #11


Combi #11

diameter: 500 — 1000 mm
flange: 1200 x 1200 mm