Installation guide

Direct, combi and pro pipe boots mounting instructions

Step 1

Cut a hole in the diaphragm corresponding to the diameter of the tube

Step 2

Put the cuff on the pipe

Step 3

Align the flange according to the shape of the roof

Step 4

Apply sealant

Step 5

Secure the cuff with screws

Installation instructions for angled pipe boots

Step 1

Cut a hole in the diaphragm corresponding to the diameter of the tube

Step 2

On the back of the flange, apply sealant

Step 3

Remove the roof elements around the pipe, tighten the seal on the pipe

Step 4

Install and secure the sealant to the roof with screws

Step 5

Cut out the top elements of the roof in the form of a seal. The lower part of the aluminum flange must remain on top of the roof